Custom Motocross Stickers bold MX-style graphics from your own designs
Motocross stickers are loud, layered and expected to survive roost, mud and pressure washers. We print MX-style graphics from your own original artwork: number backgrounds, shroud and fork guard designs, helmet decals, team and rider names, plus stickers for vans, pit boards and merchandise, on tough vinyl for bikes that spend weekends in the dirt.
- Shroud, fork guard and number board graphics
- Rider names, numbers and team designs
- Pit, van and merch stickers to match
Free quote · 10-12 working days from the day you approve your digital proof
Your design, MX attitude - PDF proof firstNothing prints until you approve it
- Free artwork reviewYour file checked before production
- Custom sizes & shapesMade to your dimensions
- UK-wide delivery10-12 working days from proof approval
Related motocross sticker types
Complete the look on the bike, the van and the helmet with these categories.
Racing stickers
Race numbers and sponsor panels.
View Racing StickersOff road stickers
Graphics for 4x4s and trail vehicles.
View Off Road StickersNumbering stickers
Matching numbers across a team.
View Numbering StickersHelmet stickers
Decals sized for helmets.
View Skateboard Helmet StickersHeavy-duty stickers
Tougher builds for hard use.
View Heavy Duty StickersBMX stickers
Graphics for BMX frames and plates.
View BMX StickersPlanning motocross graphics
MX graphics take more punishment than almost any other sticker. Material, surface preparation and number rules all come before style.
Why choose custom motocross stickers?
Motocross style is all about bold colour, sharp angles and a rider’s number front and centre. Custom stickers let you create that look around your own name, number and colours instead of wearing someone else’s brand.
For riders, a fresh set of graphics makes a used bike look sharp again and helps you spot your machine in a busy paddock. For clubs, teams and dealers, matching graphics across bikes, vans and pit shelters build a recognisable identity.
A layer of vinyl on shrouds and swingarms can also take some of the boot scuffs that would otherwise mark the plastic.
Popular uses for motocross stickers
Riders and teams order MX stickers for:
- Number backgrounds – front and side number boards.
- Shrouds, fork guards and swingarms – full-colour designs.
- Helmets – rider names and small decals where the manufacturer allows.
- Teams and clubs – matching graphics for bikes, vans and pit boards.
- Merchandise and supporters – giveaway stickers for fans and sponsors.
Materials, shapes and sizes
Thick vinyl with lamination is the choice for dirt bike plastics, where roost, boots and pressure washing all attack the print. For the worst of it, ask about heavy-duty constructions.
Every model’s plastics are a different shape, so graphics are cut from the measurements or templates you provide. Tracing the plastic onto paper and photographing it next to a ruler is a good start.
Merchandise and pit stickers can be printed on standard waterproof vinyl in any shape, from simple circles to die-cut rider logos.
Number boards, rules and application
Race organisers and governing bodies set rules for number size, colours and backgrounds, often by class. Check the current regulations for your events; you are responsible for your numbers meeting them, and we print the design you approve.
Motocross plastics are often polypropylene or polyethylene, which adhesives find harder to grip. Clean thoroughly with a suitable degreaser, and use gentle heat while applying so the vinyl flows into curves and textures.
Keep graphics off lights and the exhaust, and away from anywhere the chain or tyre could catch a lifted edge.
How MX graphics help riders and teams
A distinctive look gets noticed by photographers, fans and potential sponsors, and makes a young rider feel like a pro on the start gate.
For teams, matching bike, van and gazebo graphics create a strong presence in the paddock that supporters remember. See racing stickers for sponsor panels.
Why riders choose AStickerPrinting for motocross stickers
We check your artwork against the measurements you send, flag number sizes that look too small for the board and send a PDF proof before printing.
Your graphics are produced in 10–12 working days following approval and delivered anywhere in the UK, so order well ahead of the first round.
Customise your MX graphics
Set each piece for your bike, your class and your team.
Build your MX graphics
Send your design, bike model and plastic measurements or templates, and we will review the artwork and send a quote.
- Share your requirements
- Approve your PDF proof
- Printed & delivered UK-wide
Why UK businesses order Fox Racing Stickers from us
You approve every job first
We send a PDF proof for your approval before anything is printed, so size, colour and layout are signed off by you.
Made to your specification
Size, shape, material and finish are set for each order rather than chosen from a fixed list.
A timeline you can plan around
Typical turnaround is 10-12 working days, counted from the day you approve your digital proof. Ask about faster arrangements before you order.
Fox Racing Stickers questions, answered
Can you print Fox Racing logos on my graphics?
We cannot print protected logos or brand graphics without the rights holder’s permission. If you own or have permission to use a logo, let us know; original designs in a motocross style are always welcome.
Will the stickers survive pressure washing and roost?
Laminated thick vinyl is made for hard use, but aim the pressure washer away from graphic edges and replace any pieces badly torn in a crash.
Can you make graphics for my specific bike model?
We print from measurements or templates you provide, so any model can be covered. Tracing each plastic onto paper is the most accurate way to share its shape.
What do I need for race number backgrounds?
Check your event’s rules for the colours and number sizes required for your class, then send us those details with your number. We print to the specification you give us.
Why won’t stickers stick to my plastics?
Many dirt bike plastics resist adhesives. Degrease thoroughly, apply at room temperature and use gentle heat to help the vinyl bond, pressing firmly over every edge.
Can you print helmet decals?
Yes, from your design. Check the helmet manufacturer’s guidance before applying anything, and keep decals away from vents and the visor mechanism.
How long do motocross graphics take?
Plan on 10–12 working days after approving your proof, plus delivery. Ordering before the season starts avoids fitting graphics the night before a race.
- Quality checkedArtwork reviewed and proofed before print
- Clear turnaround10-12 working days from approval
- Tailored quotesPriced for your size and quantity
- Design supportFree artwork review on every order